King Size Linen Upholstered Bed with 3 Position Adjustable Headboard and 18 Support Legs, Gray

Eighty inches across the board

A King mattress is 76 inches wide and this headboard is 80, so it frames the bed rather than sitting inside it. The frame runs 84 inches long with the deck 12 inches up. The three headboard positions are 45, 47 and 49 inches, with matching drops of 9, 11 and 13 inches above the mattress.

Eighteen legs under a King

Six at the sides and twelve down the middle. A King deck spans 76 inches and that centre row is why the published figure reaches 1300 lb, the highest in this whole range. Ten thickened slats sit across the top of them.

Slats you fit by hand

Ten thickened slats, each fixed with hook and loop rather than screws, which on a King means the deck goes down without a screwdriver and without forty fasteners to lose. The manufacturer also states the finished frame is noise free.

Eight to fourteen inches of mattress

That is a wide window, and the adjustable headboard is what makes it workable. A 14 inch hybrid on a fixed headboard leaves very little board showing; here the board moves up to meet it. The position is set once, when the bed is built, so decide before you tighten the bolts.

45, 47 or 49 inches from the floor.

Wider than the King mattress it sits behind.

Six at the sides and twelve down the middle.

With hook and loop fasteners, no box spring.

The manufacturer's published figure.

The reason the headboard adjusts.

Published under-bed space.

The manufacturer notes receipt times may vary.

Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.

Return within 14 days of purchase, unused, in original condition and packaging.

Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.

Three headboard heights covering 8 to 14 inches, so an 80 inch board still shows above it.

Eighteen legs and a published 1300 lb across a 76 inch span, which is the highest figure published anywhere in this range of beds.

Ten slats on hook and loop rather than dozens of screws, though it does arrive in two boxes.

What we stand behind

• The 84 inch frame length, the 80 inch headboard width, the 45, 47 and 49 inch positions, the 81 by 76.5 inch mattress area, the 12 inch deck height, the 6 inch clearance, the ten slats, the eighteen legs, the 1300 lb capacity and the 8 to 14 inch mattress thickness are the manufacturer's published figures.
• 1300 lb is an unusually high published figure. We repeat it exactly as the manufacturer states it and no test method is given.
• Slat spacing is not published.
• The bed ships in two boxes and the manufacturer notes they may arrive at different times.
• The mattress and bedding in the photographs are not included.

What mattress does it take?

A King, 76 by 80 inches in Canada, between 8 and 14 inches thick. Not included.

How much wall does it need?

84 inches of length, and the headboard is 80 inches across.

What heights does the headboard fit at?

45, 47 or 49 inches from the floor.

How many legs does it have?

Eighteen: six thickened side support legs and twelve extra middle wood legs.

What is the weight capacity?

1300 lb as published by the manufacturer.

How many boxes does it ship in?

Two, and the manufacturer notes they may arrive at different times.