Queen Metal Platform Bed with Slatted Wood Headboard, Mute Bar and 12.5 Inch Clearance
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Queen Metal Platform Bed with Slatted Wood Headboard, Mute Bar and 12.5 Inch Clearance
Description
Queen Metal Platform Bed with Slatted Wood Headboard, Mute Bar and 12.5 Inch Clearance
Three horizontal boards make the headboard, with a 9 inch gap between the bottom board and the deck. The frame runs 83 inches long around a 60 by 80 inch Queen mattress, sits 12.5 inches off the floor and is rated at 1100 lb.
Black steel legs and rails with three rustic wood boards across the headboard and one along the foot. Industrial without being cold.

Eighty three inches, not eighty
The mattress area is 60 by 80 inches, a Canadian Queen. The frame around it runs 83 inches long because the headboard posts stand behind the mattress, and the headboard is 61 inches across. It reaches 40 inches from the floor, with 12.5 inches of clear space below the rails.
Twelve slats and a mute bar
The slats snap into place rather than sitting loose, and a mute bar runs under the centre where the deck bears down. On a metal bed that bar is usually the difference between a quiet night and a creak every time somebody turns over.


A foot and a half underneath
12.5 inches is enough for a suitcase lying flat or a deep bin, and it leaves a clear run for a robot vacuum from one side to the other. On a Queen footprint that is a large amount of storage most people never count.
Three boards, one gap
The headboard is three horizontal wood boards on a steel frame, with a 9 inch opening between the lowest board and the mattress deck. Pillows tuck into that gap rather than falling through it.

What the record publishes
1100 lb capacity
The manufacturer's published figure for the Queen.
12 metal slats
Snap lock fitting, no box spring needed.
Mute bar
Under the centre of the deck, for quiet.
12.5 in clearance
Published under-bed storage height.
40 in headboard
61 inches wide, in three wood boards.
Anti-slip foot pads
On every leg, to protect the floor.
Specifications
| Mattress size taken | Queen, 60 in x 80 in (not included) |
|---|---|
| Recommended mattress thickness | 8 in to 12 in |
| Frame length | 83 in |
| Headboard | 61 in wide, 40 in from the floor |
| Gap below the headboard boards | 9 in |
| Under-bed clearance | 12.5 in |
| Box spring | Not required |
| Slats | 12 metal slats, snap lock |
| Slat spacing | Not published |
| Mute bar | Fitted under the centre |
| Weight capacity | 1100 lb (Queen) |
| Feet | Anti-slip foot pads |
| Materials | Metal frame with wood headboard and footboard boards |
Size and fit at a glance
How it compares
A slatted wood headboard on a metal frame against the usual options. General category guidance.
| This bed | An all metal frame | An upholstered bed | |
|---|---|---|---|
| Headboard | 3 wood boards | Metal or none | Padded fabric |
| Published capacity | 1100 lb | Varies | Varies |
| Published clearance | 12.5 in | Varies | Usually less |
| Noise control | Mute bar and snap lock slats | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Rooms that mix wood and metal
Rustic boards on a matte black frame sit with both an oak dresser and a steel lamp.
Anyone storing luggage
12.5 inches across a Queen footprint takes suitcases flat, not just shallow bins.

What we stand behind
- The 83 inch length, the 61 by 40 inch headboard, the 9 inch gap below the boards, the 60 by 80 inch mattress area, the 12.5 inch clearance, the 1100 lb Queen capacity and the 8 to 12 inch mattress thickness are the manufacturer's published figures.
- The outer width of the frame is not published. The 61 inch figure is the headboard width.
- Slat spacing is not published.
- A 40 inch headboard sits above many window sills. Measure from your floor to the sill first.
- The mattress, bedding and storage in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Queen, 60 by 80 inches, between 8 and 12 inches thick. Not included.
How long is the frame?
83 inches. The headboard is 61 inches across and 40 inches from the floor.
How much space is under the bed?
12.5 inches of clearance.
Will it creak?
The design aims at that: snap lock slats and a mute bar under the centre of the deck.
What weight will it take?
1100 lb for the Queen size, as published.
Is a box spring needed?
No. Twelve metal slats support the mattress directly.




















