7 FT Snow Flocked Christmas Tree with Quick Shape Frame and 450 Warm White LEDs

Branches ship compressed flat, so a tall tree means bending hundreds more tips back out by hand. On a seven footer with 956 tips that is a genuine evening, and it is the job that gets postponed to the last weekend.

The upgraded hinged frame expands the branch tips while each section is raised, which the manufacturer puts at three minutes to a finished shape. The tips are reinforced so they hold that position instead of drooping back.

Seven feet, four and a half across

7 ft of height against a 4.6 ft spread on a 20 inch stand. That is a full profile rather than a slim one, so tape out a five foot circle before ordering. Guides suggest a foot of clear air above the tip, which puts this in an eight foot room or taller.

What quick shape actually means

The detail circle shows the hinge doing the work. As a section opens, the tips swing outward instead of staying flat against the pole. You will still even out a few gaps by hand, but the bulk of the shaping happens on its own.

Warm white on heavy flocking

The close up shows the bulbs sitting among thick white flocking. Flocking reflects light rather than absorbing it, so 450 warm white bulbs read brighter on this tree than the same count would on plain green foliage.

Where 956 tips lands

Category guidance puts tip counts from about 600 at the sparse end to 4600 at the dense end. At 956 on a seven foot frame this sits in the middle: full enough that the pole does not show, light enough that it is not a heavy tree to lift.

Branch tips expand as the frame opens, timed at three minutes by the manufacturer.

Snow flocking over 100% new PVC across the whole tree.

Low voltage lights with an adapter the manufacturer states is UL certificated.

Built to resist deformation, so the shape holds year to year.

A 20 inch metal stand with the bolt already installed.

Included, and worth using on flocked tips.

Installed in order, so there are no holes to line up.

Fitted to the stand to keep the floor unmarked.

Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.

Return within 14 days of purchase, unused, in original condition and packaging.

Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.

Most of the shaping happens as the sections are raised.

Seven feet leaves room for a topper and the stand.

Flocked foliage with the lights already strung.

What we stand behind

• Ornaments, wreaths and gifts in the photography are not included.
• Height, spread, stand size, tip count and light count come from the manufacturer's own graphics for this size.
• The three minute shaping claim is the manufacturer's, not our testing.
• UL certificated is the manufacturer's wording for the adapter. No Canadian certification mark is claimed.
• Ships from a Canadian warehouse, free shipping over $150.
• 14 day returns, unused and in the original packaging.

Does it really shape itself in three minutes?

That is the manufacturer's claim, and the mechanism is real: the hinges expand the tips as each section opens. Budget a few extra minutes for evening out gaps, which is still far short of a conventional fluffing session.

How is it different from the 6 ft and 8 ft sizes?

The series gives 644, 956 and 1370 branch tips with 300, 450 and 600 lights. This listing is the 7 ft.

Will the flocking shed?

Some will come loose at the first setup. Open it over a sheet and hold the inner branches rather than the tips. Keep water and cleaning sprays off the foliage.

How much floor space does it need?

4.6 ft across at the widest branches on a 20 inch stand, so allow a floor circle of about five feet.