Queen Upholstered Platform Bed with 44 Inch High Headboard and 12 Plywood Slats
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Queen Upholstered Platform Bed with 44 Inch High Headboard and 12 Plywood Slats
Description
Queen Upholstered Platform Bed with 44 Inch High Headboard and 12 Plywood Slats
Forty four inches of headboard on a frame that sits low to the floor, which is an unusual pairing and the reason the mattress window is published at 10 to 12 inches. Under the rails there are six inches of clear floor.
Dark grey faux linen over high density sponge, with a geometric stitched headboard, twelve plywood slats and extra legs.

Eighty four and a half by sixty five
The deck runs 81 inches for a Queen mattress of 60 by 80. The headboard stands 44 inches from the floor with 12 of those above the mattress, and there are six inches of clear space under the rails.
Why ten to twelve
The frame is low and the headboard is tall, so the mattress thickness decides how the proportions land. At 10 to 12 inches the sleeping surface sits at a normal height and the board still shows a full foot above it.


Six inches of floor
Enough for a robot vacuum and for flat boxes on either side. The frame is upholstered right down to the tapered legs, so there is no metal rail showing under the bedding.
What the record publishes
44 in headboard
With 12 inches above the mattress deck.
10 to 12 in mattress
The published thickness window.
6 in clearance
Published under-bed height.
12 plywood slats
In an embedded, no sliding deck.
800 lb capacity
The published figure for this size.
Faux linen
Over high density sponge padding.
Specifications
| Mattress size taken | Queen, 60 x 80 in (not included) |
|---|---|
| Recommended mattress thickness | 10 in to 12 in |
| Frame outer size | 84.5 in long x 65 in wide |
| Deck length | 81 in |
| Headboard height | 44 in from the floor |
| Headboard above the deck | 12 in |
| Under-bed clearance | 6 in |
| Slats | 12 plywood slats, embedded deck |
| Slat spacing | Not published |
| Legs | Reinforced, with additional legs |
| Box spring | Not required |
| Weight capacity | 800 lb |
| Upholstery | Faux linen with high density sponge |
| Colour | Dark grey |
Size and fit at a glance
How it compares
A tall headboard on a low frame. General category guidance.
| Ā | This bed | A typical platform bed | A bed on a box spring |
|---|---|---|---|
| Headboard | 44 in | Usually 38 to 41 in | Depends |
| Clearance | 6 in | Varies | Almost none |
| Mattress window | 10 to 12 in | Often not stated | Set by the set |
| Published capacity | 800 lb | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Rooms with a tall wall
Forty four inches of headboard fills the space above a Queen without a separate wall panel.
Heavier sleepers
Eight hundred pounds published, carried on twelve plywood slats and additional legs.

What we stand behind
- The 84.5 in by 65 in frame size, the 81 in deck, the 44 inch headboard, the 12 inches above the deck, the 6 inch clearance, the twelve slats, the 10 to 12 inch mattress window and the 800 lb capacity are the manufacturer's published figures for this size.
- The description gives capacities for three sizes in one string; only this size's drawing figure is used.
- Slat spacing, fabric fibre content and frame net weight are not published.
- The mattress, bedding and nightstands in the photographs are not included.
Frequently asked questions
What mattress does it take?
Queen, 60 x 80 in, 10 to 12 inches thick. Not included.
How much floor does it need?
84.5 in long by 65 in wide.
How tall is the headboard?
44 inches from the floor, with 12 inches above the mattress deck.
How much room is under the bed?
6 inches of clearance.
Is a box spring needed?
No. Twelve plywood slats form an embedded deck.
What weight will it carry?
800 lb for this size, as published.




















