Twin Upholstered Platform Bed with Vertical Channel Headboard and 375 lb Capacity
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Twin Upholstered Platform Bed with Vertical Channel Headboard and 375 lb Capacity
Description
Twin Upholstered Platform Bed with Vertical Channel Headboard and 375 lb Capacity
The published load capacity for this size is 375 lb, less than half the figure the Full and Queen versions carry, so it is worth reading before you buy. The frame is 79 by 42.5 inches with a 44 inch channel headboard.
The single bed in this range. Same charcoal channels and tapered legs, a much smaller footprint and a much lower published rating.

Three hundred and seventy five pounds
That is the published capacity for this size, against 800 lb on the Full and the Queen. It is enough for one sleeper, which is what a Twin is for, but it is the figure to check if the bed is meant to take two children at once or an adult who sits on the edge to dress.
A ten to twelve inch mattress
The deck is recessed inside the rails and the manufacturer asks for a mattress 10 to 12 inches thick. On a single bed that is a fairly deep mattress, and it is what brings the sleeping surface up to the level the headboard channels are designed around.


Twelve slats on a single width
Twelve plywood slats across 39 inches of mattress is close spacing for a bed this size, with additional legs underneath. The slats are the mattress support and nothing else goes on top of them.
Two in one room
At 42.5 inches wide, two of these across one wall with a gap between them needs a little over eight feet. The photograph shows exactly that arrangement, which is the usual reason to buy a pair.

What the record publishes
44 in channel headboard
With a 12 inch gap above the mattress deck.
12 plywood slats
With additional legs, no box spring needed.
375 lb capacity
The manufacturer's published figure for this size.
6 in clearance
Published bottom space, robot vacuum friendly.
Mattress 10 to 12 in
The manufacturer's recommended thickness.
Faux linen over sponge
High density sponge behind the cover.
Specifications
| Mattress size taken | Twin, 39 in x 75 in (not included) |
|---|---|
| Recommended mattress thickness | 10 in to 12 in |
| Frame outer size | 79 in long x 42.5 in wide |
| Headboard height | 44 in from the floor |
| Gap above the deck | 12 in |
| Under-bed clearance | 6 in |
| Slats | 12 plywood slats with additional legs |
| Slat spacing | Not published |
| Box spring | Not required |
| Weight capacity | 375 lb |
| Upholstery | Faux linen fabric over high density sponge |
| Colour | Dark grey |
Size and fit at a glance
How it compares
How this size differs from the larger ones in the same range. General category guidance.
| Ā | This Twin | The Full version | The Queen version |
|---|---|---|---|
| Published capacity | 375 lb | 800 lb | 800 lb |
| Outer size | 79 x 42.5 in | 79 x 59 in | 84.5 x 65 in |
| Headboard height | 44 in | 44 in | 44 in |
| Clearance | 6 in | 6 in | 6 in |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Children's and guest rooms
A padded headboard on a bed that takes under four feet of wall width.
Shared rooms
Two of these across one wall needs a little over eight feet including a gap.

What we stand behind
- The 79 by 42.5 inch frame size, the 44 inch headboard, the 12 inch gap above the deck, the 6 inch clearance, the twelve slats, the 375 lb capacity and the 10 to 12 inch mattress thickness are the manufacturer's published figures.
- The 375 lb capacity is published for this size only. The Full and Queen versions of the same bed publish 800 lb. We state the figure rather than borrowing the higher one.
- The cover is published as a faux linen fabric, not linen.
- Slat spacing is not published.
- The mattress, bedding and toys in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Twin, 39 by 75 inches, between 10 and 12 inches thick. Not included.
How much floor does it need?
79 inches long by 42.5 inches wide.
What is the weight capacity?
375 lb for this size, as published. The larger sizes of the same bed publish 800 lb.
How tall is the headboard?
44 inches from the floor.
How much space is under the bed?
6 inches of clearance.
Is a box spring needed?
No. Twelve plywood slats and additional legs form the platform.




















