Queen Wood Platform Bed with 12 Plywood Slats and 4.5 Inch Slat Gap, Espresso
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Queen Wood Platform Bed with 12 Plywood Slats and 4.5 Inch Slat Gap, Espresso
Description
Queen Wood Platform Bed with 12 Plywood Slats and 4.5 Inch Slat Gap, Espresso
This is one of the few frames in the range that publishes its slat gap: 4.5 inches between slats. That figure matters if you sleep on foam. The frame is 82 by 62 inches with 10.5 inches of clear floor underneath.
The problem this solves
What usually goes wrong
Almost no bed frame publishes its slat gap, and an all foam mattress laid on slats that are too far apart can settle between them and void its warranty.
How this one answers it
This one gives the number: 4.5 inches. Foam makers generally ask for less than three, so read your mattress warranty before ordering, or pair this frame with an innerspring or hybrid where the gap does not matter.
A dark espresso wooden platform with twelve plywood slats, rubber wood legs and five middle supports on adjustable pads.

Eighty two by sixty two
A tight footprint for a Queen, with the deck sitting 14 inches off the floor and 10.5 inches of clear space beneath the rails. Ten and a half inches is genuine storage height, not just a cleaning gap.
Four and a half inches between slats
The gap is published rather than left to guess, and it sits wider than the three inch spacing that foam mattress makers usually ask for. On an innerspring or a hybrid it is not an issue. On an all foam mattress it is worth checking your warranty first.


Five legs down the centre
Each middle leg carries an adjustable pad, and the corners use reinforced bolt connections rather than dowels. Rubber wood is dense enough to hold that hardware without the joints loosening over a few years of use.
What the record publishes
4.5 in slat gap
A published figure, which is rare in this category.
82 x 62 x 14 in
Overall frame size for a Queen.
10.5 in clearance
Published under-bed height.
12 plywood slats
On five middle support legs.
800 lb capacity
The published figure for the Queen.
Adjustable foot pads
Under the middle legs.
Specifications
| Mattress size taken | Queen, 60 in x 80 in (not included) |
|---|---|
| Frame outer size | 82 in long x 62 in wide x 14 in tall |
| Under-bed clearance | 10.5 in |
| Slats | 12 robust plywood slats |
| Slat spacing | 4.5 in between slats |
| Legs | Solid rubber wood with 5 middle supports and adjustable pads |
| Headboard | None |
| Box spring | Not required |
| Weight capacity | 800 lb |
| Recommended mattress thickness | Not published |
| Colour | Espresso |
Size and fit at a glance
How it compares
Slat gaps compared. Category guidance from mattress makers.
| This bed | Foam mattress guidance | An innerspring set | |
|---|---|---|---|
| Published gap | 4.5 in | Usually under 3 in | Less critical |
| Slats | 12 plywood | Varies | Box spring instead |
| Clearance | 10.5 in | Varies | Almost none |
| Published capacity | 800 lb | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Innerspring and hybrid sleepers
The 4.5 inch gap is a non issue under a sprung mattress.
Anyone storing under the bed
Ten and a half inches is enough for a case lying flat, with only slim legs in the way.

What we stand behind
- The 82 by 62 by 14 inch frame size, the 10.5 inch clearance, the twelve slats, the 4.5 inch slat gap, the five middle legs and the 800 lb capacity are the manufacturer's published figures for the Queen.
- The 4.5 inch figure is measured between two slats on the manufacturer's own close photograph.
- A recommended mattress thickness and frame net weight are not published.
- The mattress, bedding and baskets in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Queen, 60 by 80 inches. Not included.
How far apart are the slats?
4.5 inches between slats, as published.
Will a foam mattress work on it?
Foam mattress makers usually ask for a gap under three inches, so check your mattress warranty against the 4.5 inches here.
How much floor does it need?
82 inches long by 62 inches wide.
How much room is under the bed?
10.5 inches of clearance.
What weight will it carry?
800 lb for the Queen, as published.




















