Queen Upholstered Platform Bed with 2 Height Channel Tufted Headboard and 12 LVL Slats
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Queen Upholstered Platform Bed with 2 Height Channel Tufted Headboard and 12 LVL Slats
Description
Queen Upholstered Platform Bed with 2 Height Channel Tufted Headboard and 12 LVL Slats
Most upholstered beds fix the headboard at one height and leave you guessing whether your mattress will swallow it. This one bolts up at either 40.5 or 44 inches and states the mattress range it was built around, 10 to 14 inches, on a frame that takes 83.5 by 61.5 inches of floor.
Grey linen with vertical channel tufting across a curved headboard, on twelve laminated veneer lumber slats and ten legs.

Floor space and mattress range
The frame is 83.5 inches long and 61.5 inches wide for a Queen mattress of 60 by 80. Side rails stand 9.5 inches off the floor. The published mattress range is 10 to 14 inches thick, which is the figure that decides whether the headboard still shows above your bedding once the bed is made.
Two heights, one bolt pattern
The headboard mounts at 40.5 inches or at 44 inches from the floor. The taller setting suits the thicker end of that mattress range or a room where the bed sits under a window and you want the board to read as a proper backrest rather than a strip.


Twelve slats and ten legs
Laminated veneer lumber slats run across the frame, with four solid wood legs down the centre line on top of the six that carry the perimeter. Ten legs under a Queen is more than most upholstered frames use, and the published capacity is 770 lb.
Channel tufting, not buttons
Vertical padded channels instead of buttons, so there are no dimples for dust to collect in and nothing to catch a pillowcase. The linen is described as breathable and skin friendly, and the padding is soft enough to lean on without a cushion behind you.

What the record publishes
Headboard 40.5 or 44 in
Two bolt positions from the floor.
10 to 14 in mattress
The manufacturer's recommended thickness range.
12 LVL slats
Laminated veneer lumber, no box spring.
10 legs
Six on the perimeter, four solid wood in the centre.
770 lb capacity
The published figure for this size.
9.5 in frame height
Measured at the side rail.
Specifications
| Mattress size taken | Queen, 60 in x 80 in (not included) |
|---|---|
| Recommended mattress thickness | 10 in to 14 in |
| Frame outer size | 83.5 in long x 61.5 in wide |
| Headboard height | 40.5 in or 44 in from the floor |
| Frame height at the side rail | 9.5 in |
| Under-bed clearance | Not published |
| Slats | 12 LVL slats |
| Slat spacing | Not published |
| Legs | 10, including 4 solid wood centre legs |
| Box spring | Not required |
| Weight capacity | 770 lb |
| Upholstery | Linen fabric, vertical channel tufting |
| Colour | Grey |
Size and fit at a glance
How it compares
A two height headboard against a fixed one. General category guidance.
| This bed | A fixed headboard Queen | A metal Queen frame | |
|---|---|---|---|
| Headboard | 40.5 or 44 in | One height | Often none |
| Mattress range stated | 10 to 14 in | Often not stated | Often not stated |
| Legs | 10 | Usually 6 | Varies |
| Published capacity | 770 lb | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Thick mattress owners
A 13 or 14 inch Queen sits inside the published range, and the 44 inch setting keeps the board visible above it.
Light sleepers
Ten legs and a fixed slat deck are what the record leans on for a quiet frame that does not shift when you turn.
Renters and movers
Bolt together construction and an upholstered board that comes off the frame for a stairwell.

What we stand behind
- The 83.5 by 61.5 inch frame size, the 40.5 and 44 inch headboard heights, the 9.5 inch rail height, the 10 to 14 inch mattress range, the twelve slats, the ten legs and the 770 lb capacity are the manufacturer's published figures.
- Slat spacing and under-bed clearance are not published.
- Linen fibre content is not published.
- The mattress, bedding and side tables in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Queen, 60 by 80 inches, 10 to 14 inches thick. Not included.
How much floor does it need?
83.5 inches long by 61.5 inches wide.
How tall is the headboard?
Either 40.5 inches or 44 inches from the floor, set at assembly.
Is a box spring needed?
No. Twelve LVL slats form the platform.
What weight will it carry?
770 lb, as published for this size.
Will a 9 inch mattress work?
It is below the published 10 to 14 inch range, so the record does not support it.




















