Full Size Wood Platform Bed Frame with 12 Slats, Rubber Wood Legs and 10.5 Inch Clearance, Espresso
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Full Size Wood Platform Bed Frame with 12 Slats, Rubber Wood Legs and 10.5 Inch Clearance, Espresso
Description
Full Size Wood Platform Bed Frame with 12 Slats, Rubber Wood Legs and 10.5 Inch Clearance, Espresso
Five legs run down the centre of this deck on screw adjustable pads, which is what keeps it level on an old floor. The frame is 76.5 by 56 inches, stands 14 inches tall with 10.5 inches clear underneath, and is rated at 800 lb.
Dark espresso rails on pale rubberwood legs, with twelve slats across and no headboard at either end.

The frame is wider than the mattress
76.5 by 56 inches on the floor for a 54 by 75 inch Double, so the rails stand proud of the mattress on all four sides. It is 14 inches to the top of the deck with 10.5 inches of clear space beneath, and the published capacity is 800 lb.
Twelve slats, and the gap
The panel measures the space between slats at 4.5 inches. Foam and hybrid mattress makers commonly ask for three inches or less, so check your mattress warranty before pairing this deck with foam. An innerspring mattress is the straightforward match.


Five legs down the middle
Five centre legs, each on a pad that screws up and down, plus bolted corner connections. Between them that is what carries an 800 lb rating across a 56 inch span without the middle of the deck dropping.
Ten and a half inches underneath
Suitcases on their side, deep bins, a robot vacuum. With no footboard and no side skirt the clearance is the same all the way round, so you can reach in from wherever you are standing.

What the record publishes
800 lb capacity
Published for the Full size.
12 plywood slats
Set at a published 4.5 inch gap.
5 middle support legs
Down the centre of the deck.
Adjustable foot pads
Screw pads for levelling on an uneven floor.
10.5 in clearance
Published under-bed height.
Rubber wood legs
Solid rubberwood with reinforced connections.
Specifications
| Mattress size taken | Full / Double, 54 in x 75 in (not included) |
|---|---|
| Frame outer size | 76.5 in x 56 in x 14 in |
| Under-bed clearance | 10.5 in |
| Box spring | Not required |
| Slats | 12 plywood slats |
| Slat spacing | 4.5 in gap (manufacturer panel) |
| Weight capacity | 800 lb (Full) |
| Middle support legs | 5, with adjustable foot pads |
| Leg material | Solid rubberwood |
| Colour | Espresso |
| Headboard | None |
Size and fit at a glance
How it compares
Where a 4.5 inch slat gap matters. General category guidance.
| Ā | This frame | A close-slatted deck | A box spring set |
|---|---|---|---|
| Published slat gap | 4.5 in | Often under 3 in | Not applicable |
| Foam mattress | Check the warranty | Usually fine | Fine |
| Innerspring mattress | Suited | Suited | Suited |
| Clearance underneath | 10.5 in | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Innerspring mattress owners
A 4.5 inch gap and a published 800 lb, with no box spring to buy.
Uneven or sloping floors
Five centre legs on screw pads take up the difference instead of rocking.

What we stand behind
- The 76.5 by 56 by 14 inch frame size, the 10.5 inch clearance, the 800 lb capacity, the twelve slats and the 4.5 inch slat gap are the manufacturer's published figures.
- The 4.5 inch gap is wider than the three inches most foam and hybrid mattress makers ask for. We publish it so you can check your own mattress warranty.
- The written description is shared across the Twin, Full and Queen versions of this frame. Only the Full panel figures are published here.
- No recommended mattress thickness is published for this frame.
- The mattress and bedding in the photographs are not included.
Frequently asked questions
What mattress size does it take?
A Full, sold as a Double in Canada, 54 by 75 inches. Not included.
How big is the frame?
76.5 inches long by 56 inches wide, standing 14 inches tall.
How far apart are the slats?
4.5 inches, as measured on the manufacturer's panel.
Will a foam mattress sag on it?
The gap is wider than the three inches foam makers usually ask for. Check your mattress warranty and add a bunkie board if it calls for one.
How much fits underneath?
10.5 inches of clearance, which takes a suitcase on its side.
What weight does it hold?
800 lb for the Full size, as published.




















