7 Piece Acacia and Steel Patio Dining Set for 6, 63 Inch Table and Six Lattice Back Armchairs, Natural and Black

Metal framed outdoor chairs usually drop a cushion straight onto the frame or onto a thin panel. It is fine when you sit down. By the second course you are shifting your weight because there is a rail under one thigh and nothing under the other.

These chairs carry reinforced PE webbing stretched across the seat under the cushion, which the manufacturer describes as strong bottom support. The webbing gives slightly and spreads the load, so what you feel is the sponge above it rather than the steel below.

Six places on a 63 inch top

Two chairs down each long side and one at each end. What sets this set apart from a distance is the open lattice in the chair backs and side panels, which keeps six chairs from reading as a solid wall of furniture around the table.

The top, and the care it wants

Solid acacia laid in slatted panels, which the manufacturer describes as smooth to the touch and high in hardness. They print two instructions on the same panel and both are worth taking seriously. Avoid rain exposure for prolonged service life, and apply wood oil regularly. The oil is not included.

Three things about the cushions

Soft sponge filling that holds its shape, fixing ties that hold each pad to its chair so it does not slide off when you stand, and covers with smooth zips for washing. On sand coloured fabric the washing part is the one you will use.

Shade, with a cap for the hole

A 1.97 in hole through the middle of the top, with a centre support block underneath to hold a pole steady and a wooden cap that drops in when there is no umbrella. The manufacturer is clear that a base is required for stability and that neither the umbrella nor the base is included.

Stretched under every seat cushion, which the manufacturer calls strong bottom support.

A high published figure for a wooden patio table. Each of the six chairs is rated to 400 lb.

Acacia squares in the backrests and the side panels, which let air and light through.

Slatted acacia at 29.5 in high, on a black steel frame with skid style legs.

Tied to the chair so a pad does not slide off when somebody stands up quickly.

With a wooden cap and a centre support block. Umbrella and base are not included.

Smooth zips on every cover, so they come off in one piece for the machine.

Plus the cushion, under a 29.5 in tabletop, which lands in the usual dining range.

Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.

Return within 14 days of purchase, unused, in original condition and packaging.

Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.

Webbing under the pad is the difference between a chair you sit on and one you get up from after half an hour.

Six matching armchairs on a 63 in top, with a tabletop rated to 355 lb for everything you put on it.

Lattice backs and side panels keep a six chair set from walling off the view across the garden.

The hole takes a 1.97 in pole and the cap keeps the top flat and usable when the umbrella is away.

What we stand behind

• Every measurement above, both weight capacities and the 1.97 in umbrella hole come from the product's own dimension drawing and specification block.
• The cushion thickness is the only figure the manufacturer gives in centimetres rather than inches. It is printed here as 5.5 cm with the inch equivalent alongside.
• Smooth touch, high hardness and natural beauty are the manufacturer's words. No wood grade, coating or finish warranty is published, so none is quoted.
• Their own instructions are to avoid rain exposure for prolonged service life and to apply wood oil regularly. Neither the oil nor a cover is included.
• Ships from a Canadian warehouse, free shipping over $150. 14 day returns, unused and in the original packaging.

What is under the seat cushion?

Reinforced PE webbing stretched across the seat frame. It is the reason the cushion has something to sit on other than the steel, and the manufacturer lists it as strong bottom support.

How thick are the cushions?

The manufacturer gives this one figure in centimetres, at 5.5 cm, which is roughly 2.2 in. Every other measurement on the listing is in inches.

Can it be left out all season?

The manufacturer asks that you avoid rain exposure for prolonged service life and that wood oil is applied regularly. Bring the cushions in and cover the set when the weather turns.

Does the umbrella hole have a cover?

Yes. A cap drops in to keep the top flat when no umbrella is fitted, and a centre support block sits under the hole. A base is required for stability and is not included.