Blue Floral High Back Accent Chair with Rolled Arms, Solid Wood Frame and 400 lb Capacity
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Blue Floral High Back Accent Chair with Rolled Arms, Solid Wood Frame and 400 lb Capacity
Description
Blue Floral High Back Accent Chair with Rolled Arms, Solid Wood Frame and 400 lb Capacity
The print is a blue and white botanical on a cream ground, large enough that about two blooms fill the 20.5 inch back cushion. Underneath it sits the same high back frame you would buy plain: 32 inches wide, 30 deep, a seat 17.5 inches off the floor on a 4 inch cushion, and a 400 lb capacity printed by the maker.
Judging a printed chair from a screen
Photographs hide the scale of a pattern
A print that looks delicate in a styled room can arrive at twice the size you pictured. Nothing in a room set tells you how big the flowers actually are, and a motif that swamps the chair is the usual reason a patterned armchair goes back in its box.
Measure the motif against the panel
The maker's dimension drawing uses the real fabric, so the print is drawn to scale beside the numbers. The back cushion is 20.5 inches square and roughly two large blooms fill it, which puts each flower at somewhere near ten inches across.
A blue and white botanical linen over a solid wood frame, with softly rolled arms and dark stained rubber wood legs. The back cushion is separate from the frame and its cover comes off.
The chair with nothing around it
The studio shot, with no room set to flatter the print. The back rises well clear of the arms, the arms roll over softly rather than finishing square, and four dark stained legs lift the frame off the floor.
Measured front and side
Thirty-two inches wide, 30 deep and 36 high. The seat is 21 inches across and sits 17.5 inches up on 6.5 inch legs, with a 20.5 inch square back cushion, arms at 24 inches and a 400 lb capacity printed alongside.
What holds it up
The frame is solid wood and the legs are rubber wood, shown at 6.5 inches with anti slip pads underneath. That clearance is enough for a robot vacuum to pass below, which is what the maker chose to photograph.
Three details the maker measured
A removable and washable back cushion cover, armrests padded to 3.5 inches, and a seat cushion measured at 4 inches. Arm padding is worth checking on a wood framed chair, because a rolled arm is often bare timber.
What the panels state
400 lb published
Printed on the maker's own dimension panel. A static rating, describing weight resting evenly on the seat.
36 in back
Measured from the floor, with a 20.5 inch square cushion filling it, so the support reaches the shoulders.
Floral linen
A blue and white botanical print on premium linen fabric, described as breathable and wear resistant.
Washable back cover
The back cushion cover is removable and washable, and the maker photographs it coming off.
3.5 in padded arms
Measured on the detail panel, so the rolled arms are upholstered rather than bare frame under the fabric.
6.5 in legs
Rubber wood, with anti slip foot pads, giving enough floor clearance for a vacuum head to pass.
Specifications
| Overall size | 32 in W x 30 in D x 36 in H |
|---|---|
| Seat width | 21 in |
| Seat height | 17.5 in from the floor |
| Seat cushion thickness | 4 in |
| Back cushion | 20.5 in x 20.5 in |
| Arm height | 24 in |
| Arm padding | 3.5 in |
| Leg height | 6.5 in |
| Weight capacity | 400 lb, printed by the manufacturer |
| Frame | Solid wood with rubber wood legs and anti slip foot pads |
| Upholstery | Premium linen fabric, blue and white floral print |
| Filling | High density foam |
| Covers | Removable and washable back cushion cover |
How it compares
Against the usual alternatives. General category guidance, not lab testing.
| Ā | This armchair | Low back accent chair | Plain upholstered armchair |
|---|---|---|---|
| Back height | 36 in from the floor | Often under 32 in | Varies |
| Pattern | Printed floral linen | Usually plain | Plain |
| Arm padding | 3.5 in, measured | Often bare frame | Varies |
| Published capacity | 400 lb | Often not published | Varies |
| Footprint | 32 in x 30 in | Usually smaller | Usually larger |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
A pattern in a plain room
One printed chair does more to a neutral living room than a whole set of cushions, and it is easier to undo later.
Reading corners
A back that reaches the shoulders is the difference between a chair you perch in and one you settle into for an evening.
What we stand behind
- Every measurement and the 400 lb capacity come from the manufacturer's own dimension panel.
- The pattern scale quoted here is read off that same panel, which is drawn with the real fabric. Treat ten inches as an estimate, not a printed figure.
- No fibre content, foam density, carton size, assembly time or net weight is published, so none is quoted.
- Ships from a Canadian warehouse, free shipping over $150.
- 14 day returns, unused and in the original packaging.
Frequently asked questions
How large is the floral print?
The dimension drawing is printed on the real fabric, and about two large blooms fill the 20.5 inch square back cushion. That puts a single flower somewhere near ten inches across. It is a read off the picture rather than a figure the maker prints, so treat it as a guide.
Will it fit through a standard doorway?
Carton dimensions are not published for this chair, so the honest answer is to measure the assembled figures. At 32 inches wide and 30 deep it will normally pass a 32 inch door on its side, but check the narrowest point of the route, which is usually a stair turn rather than the door itself.
Does the back cushion cover come off?
Yes. The record describes a removable and washable back cushion cover. Check the care label before washing, and dry it flat rather than hot so it still fits when it goes back on.
How much weight will it hold?
Four hundred pounds, printed on the maker's panel. It is a static rating for weight resting evenly on the seat, not for someone dropping into the chair from standing.
You may also like
64.5" H Hall Tree with Storage Drawer & Top Shelf, Coat Rack Wooden Entryway Storage Bench Hall Tree Hallway Clothes Bag Coat Rack 4 Hooks, White
Hall Tree with Bench and Shoe Storage, Entryway Bench with Coat Rack, 12 Shelves, 2 Cabinets, 5 Hooks, White Wood Grain
4-In-1 Hall Tree with Shoe Bench, Modern Coat Rack with Open Shelf for Hallway, Entryway, Bedroom, Living Room, White
Staff Pick
3-In-1 Hall Tree w/ Coat Rack, Shoe Storage and Bench Seat, Entryway Bench w/ 4 Hooks for Hallway, Living Room, White
3-in-1 Hall Tree with Bench, Coat Rack with Shoe Storage, Distressed Black
4-In-1 Hall Tree with Coat Rack, Top Shelf, Shoe Storage and Bench Seat, Entryway Bench with 4 Hooks
Staff Pick
Coat Rack Shoe Bench, Hall Tree with Bench and Shoe Storage, Entryway Bench with 4 Hooks, 2 Drawers, 2 Shelves, White
15.7" x 9.8" x 39.4" Firewood Rack Outdoor, Log Holder Fireplace Storage Rack with Handles and 220 lbs. Weight Capacity, Black
2-Tier Firewood Rack with Shovel, Broom, Poker, Tongs, Side Hooks, Log Holder for Fireplace, Outdoor Indoor Wood Storage Stacker, 21.7" x 12.6" x 30.3", Black
Summer Deal
