8 FT Pre-Lit Hinged Christmas Tree with Cashmere Needles and 36 Pine Cones

The taller the tree, the more of the same moulded needle there is to look at. On an eight foot tree a single repeated shape is obvious from across the room, let alone from the sofa.

This one mixes fine cashmere needles with 36 natural pine cones and bare withered branches, on a trunk printed with bark texture. Those irregularities are what an eight foot tree needs to avoid looking stamped out.

Eight feet, three and a third across

8 FT of height against a 3.3 FT spread on a 24 inch stand. Guides advise about twelve inches of clear air above the tip, so a ceiling of nine and a half feet or more suits it once a topper is on.

What is on the branches

The graphic names each element: withered bare branches, 36 natural pine cones and a bark textured trunk, with 702 cashmere needle tips around them. The cone count rises with the size across this family.

Four hundred vintage bulbs

The LEDs are shaped like old tungsten filaments, which gives an amber light rather than a white one. On eight feet of tree, 400 of them is a warm even glow rather than a bright display.

Three sections at eight feet

Even at this height the frame is three parts, with hinged branches and a stand whose bolt is already fitted. Decorate each section as it goes on rather than working from a ladder beside a finished tree.

Fine, soft pine needles rather than flat cut PVC blades.

The highest cone count in this family, set among the branches.

Bare branch detail worked into the foliage.

Bark texture rather than a plain green pole.

Warm white bulbs shaped to mimic classic tungsten filaments.

A wider stand for the taller tree, with the bolt pre-installed.

Three hinged parts, each a manageable carry.

Included for handling the tips and the cones.

Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.

Return within 14 days of purchase, unused, in original condition and packaging.

Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.

Eight feet wants about nine and a half feet of room to look right.

Cones, bare branches and a textured trunk are worth paying for at close range.

Tungsten style bulbs give amber rather than white.

What we stand behind

• Ornaments, wreaths and gifts in the photography are not included. The pine cones and bare branches are fitted.
• Height, spread, stand size, tip count and cone count come from the manufacturer's own graphics for this size.
• The 702/502/370 tip series and 400/300/200 light series in the description place this size at 702 tips and 400 lights.
• UL listed is the manufacturer's wording for the adapter. No Canadian certification mark is claimed.
• Ships from a Canadian warehouse, free shipping over $150.
• 14 day returns, unused and in the original packaging.

What ceiling height does it need?

About nine and a half feet. Guides advise roughly twelve inches of clear air above the tip, and a topper adds to that. In a standard eight foot room it will not stand upright.

How much floor does it take?

3.3 ft across at the widest branches on a 24 inch stand, so a floor circle of about four feet. It is narrow for eight feet, which helps.

Are the cones and branches fixed?

Yes. 36 natural pine cones and the withered bare branches are part of the tree rather than clip on decorations.

How do I decorate the top?

Section by section as the tree goes up. That is safer than a ladder beside a finished eight foot tree and it gets ornaments into the middle of the tree where they show.