7.5 FT Pre-Lit Artificial Christmas Tree with 1346 PVC Tips, 400 Warm White LEDs and Iron Stand

Doing it by hand means testing the string first, finding the dead run, then working round and round the tree trying to keep the spacing even and the wire out of sight. It takes most of an evening and it never looks quite right.

The LEDs are fitted through the branches at the factory on a single plug, spaced evenly and sitting inside the foliage rather than on top of it. Stack three sections, plug in, and the remaining job is spreading the tips.

Seven and a half by four point three

The drawing gives 7.5 feet of height on a 4.3 foot spread, a standard full profile shape. Leave a clear circle near five feet. On height, sizing guides pair a 7.5 foot tree with a 9 foot ceiling, or an 8 foot one if the topper sits flat.

Where the bulbs actually sit

The magnified circle shows the bulbs tucked down among the needles rather than standing proud on the outside. With 1346 tips packed around them the light spreads through the foliage instead of glaring. That is the practical difference between a factory strung tree and a string wound on by hand.

Lights off, lights on

The same tree both ways, with the transformer shown between them. Unlit it is a plain green fir with a good outline. Lit, the warm white carries right into the centre of the tree. The manufacturer states the transformer is UL certified.

Pre-strung through every section on a single plug, with nothing to test or untangle first.

Dense PVC needles counted by the manufacturer, enough to hide the pole once spread.

Every branch stays on the trunk and opens out as the section is raised, like a fan.

Metal rather than plastic, which is the part that usually cracks on a cheaper tree of this size.

Stated by the manufacturer, with a 120 V 60 Hz input and a 30 V 290 mA output.

The trunk lifts apart for storage, so a 7.5 ft tree packs back into its box each January.

Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.

Return within 14 days of purchase, unused, in original condition and packaging.

Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.

One light colour, one switch, nothing to programme. It looks the same good way every evening.

At 7.5 feet with a 4.3 foot spread it fills a tall room properly instead of looking undersized.

Warm white on green goes with every ornament anyone already owns, so nothing else has to be bought.

What we stand behind

• The 1346 tip count and the 400 LED count are printed on the manufacturer's own detail panel.
• The 7.5 ft by 4.3 ft size is read off the maker's dimension drawing.
• The electrical figures are quoted exactly as the manufacturer's specification list gives them.
• Ships from a Canadian warehouse, free shipping over $150. 14 day returns, unused and in the original packaging.

How long does it take to set up?

The frame goes together quickly, since the branches are hinged and open on their own. Shaping is the slow part, and the manufacturer suggests allowing 45 to 60 minutes to bring the tree to its fullest form. Fluffing guides recommend doing it bottom section upward rather than all at once.

What colour are the lights?

Warm white only, with no mode controller on this model, so the tree is simply on or off. If you want colour options or flashing patterns, there are multi mode trees elsewhere in this range.

How much floor space does it need?

Four point three feet across at the lowest branches. Leave a circle of about five feet so nobody catches a branch. Sizing guides pair a 7.5 foot tree with a 9 foot ceiling once a topper is allowed for.

What happens if a bulb fails?

Lighting trade guidance is that an LED which fails but stays intact leaves the rest of the run lit, while a lens cracked right through can take out a whole section. These lights are fitted at the factory, so treat them as part of the tree rather than a string to swap.