Twin Wood Platform Bed with Upholstered Headboard Panel and 16 Inch Footboard
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Twin Wood Platform Bed with Upholstered Headboard Panel and 16 Inch Footboard
Description
Twin Wood Platform Bed with Upholstered Headboard Panel and 16 Inch Footboard
A pale wood Twin with a padded fabric panel set into the headboard, so the frame stays timber and the part you lean on is soft. It takes 80 by 40.5 inches of floor and carries a published 550 lb on twelve plywood slats.
Light oak toned wood with slatted rails at both ends, a padded faux linen panel in the headboard and rounded corners.

Eighty by forty and a half
The deck is 75 by 39 inches for a Twin mattress and the frame runs 80 inches long. The headboard reaches 41.5 inches and the footboard 16, so both ends are counted inside that length. Under the rails there are 6.5 inches.
Timber with a soft middle
The panel is faux linen over high density sponge, set inside a wooden surround with open slats above it. That is the compromise a wooden bed usually cannot make: it looks like timber from across the room and feels like an upholstered bed at the pillow. The rest of the frame stays wipe clean timber.


Twelve slats, rounded corners
The deck is embedded between the rails so a mattress cannot creep toward either end, and the corners are rounded rather than cut square. The published mattress window is 8 to 10 inches, which is a narrow band worth checking against the mattress you already own before ordering.
Low and easy to get into
Six and a half inches of clearance and a low frame, which the manufacturer sells as easy access rather than as storage. A robot vacuum passes underneath and the slatted footboard means you can still see the floor beyond the bed rather than a solid panel.

What the record publishes
80 x 40.5 in frame
Over a 75 by 39 inch deck.
41.5 in headboard
With a 16 inch slatted footboard.
6.5 in clearance
Published under-bed height.
12 plywood slats
In an embedded, no sliding deck.
8 to 10 in mattress
The published thickness window.
550 lb capacity
The published figure for the Twin.
Specifications
| Mattress size taken | Twin, 38 in x 75 in (not included) |
|---|---|
| Recommended mattress thickness | 8 in to 10 in |
| Frame outer size | 80 in long x 40.5 in wide |
| Deck size | 75 in long x 39 in wide |
| Headboard height | 41.5 in from the floor |
| Footboard height | 16 in |
| Under-bed clearance | 6.5 in |
| Slats | 12 plywood slats, embedded deck |
| Slat spacing | Not published |
| Legs | Thick wooden support legs |
| Box spring | Not required |
| Weight capacity | 550 lb |
| Upholstery | Faux linen with high density sponge |
| Corners | Rounded |
| Colour | Natural |
Size and fit at a glance
How it compares
A part upholstered wooden bed against the alternatives. General category guidance.
| This bed | A fully upholstered Twin | A plain wooden Twin | |
|---|---|---|---|
| Headboard | Wood with a padded panel | All fabric | All wood |
| Footboard | 16 in slatted | Often none | Varies |
| Clearance | 6.5 in | Varies | Varies |
| Published capacity | 550 lb | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Children who read in bed
A padded panel where their back meets the headboard, in a wooden frame.
Natural, light bedrooms
Pale oak toned wood with a neutral fabric rather than paint.
Small rooms
Eighty inches long for a 75 inch mattress, with both ends counted in.

What we stand behind
- The 80 by 40.5 inch frame size, the 75 by 39 inch deck, the 41.5 inch headboard, the 16 inch footboard, the 6.5 inch clearance, the twelve slats, the 8 to 10 inch mattress window and the 550 lb capacity are the manufacturer's published figures for the Twin.
- Slat spacing, fabric fibre content and frame net weight are not published.
- Assembly is required.
- The mattress, bedding and nightstands in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Twin, 38 by 75 inches, 8 to 10 inches thick. Not included.
How much floor does it need?
80 inches long by 40.5 inches wide.
How tall are the ends?
41.5 inches at the headboard and 16 inches at the footboard.
Is the headboard wood or fabric?
Both. A padded fabric panel sits inside a wooden surround with open slats above it.
How much room is under the bed?
6.5 inches of clearance.
Is a box spring needed?
No. Twelve plywood slats form an embedded deck.
What weight will it carry?
550 lb for the Twin, as published.




















