Twin Upholstered Platform Bed with 44 Inch High Headboard and 12 Plywood Slats
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Twin Upholstered Platform Bed with 44 Inch High Headboard and 12 Plywood Slats
Description
Twin Upholstered Platform Bed with 44 Inch High Headboard and 12 Plywood Slats
Forty four inches of headboard on a frame that sits low to the floor, which is an unusual pairing and the reason the mattress window is published at 10 to 12 inches. Under the rails there are six inches of clear floor.
The problem this solves
What usually goes wrong
The description lists three capacities in one string, 800, 800 and 375 pounds, without saying which belongs to which size. It is easy to read the biggest one and assume it applies.
How this one answers it
The Twin drawing settles it: 375 lb, printed on the badge. That is the figure for this size. If you need the higher number, it belongs to the Full and Queen versions of the same frame, not to this one.
Dark grey faux linen over high density sponge, with a geometric stitched headboard, twelve plywood slats and extra legs.

Seventy nine by forty two and a half
For a Twin mattress on a 76 inch deck. The headboard reaches 44 inches, which is tall for a Twin, with 12 of those inches standing above the mattress. Six inches of clearance underneath.
Ten to twelve inches
The window is published, and the deck sits recessed inside the rails so the mattress cannot slide out from under a sleeping child. A mattress in that band brings the sleeping surface to a normal height on a low frame.


Twelve slats and extra legs
Additional legs underneath the twelve plywood slats, which is what the published 375 lb rests on. That figure is well below the Full and Queen versions of the same bed, and it is the one that applies here.
What the record publishes
44 in headboard
With 12 inches above the mattress deck.
10 to 12 in mattress
The published thickness window.
6 in clearance
Published under-bed height.
12 plywood slats
In an embedded, no sliding deck.
375 lb capacity
The published figure for this size.
Faux linen
Over high density sponge padding.
Specifications
| Mattress size taken | Twin, 38 x 75 in (not included) |
|---|---|
| Recommended mattress thickness | 10 in to 12 in |
| Frame outer size | 79 in long x 42.5 in wide |
| Deck length | 76 in |
| Headboard height | 44 in from the floor |
| Headboard above the deck | 12 in |
| Under-bed clearance | 6 in |
| Slats | 12 plywood slats, embedded deck |
| Slat spacing | Not published |
| Legs | Reinforced, with additional legs |
| Box spring | Not required |
| Weight capacity | 375 lb |
| Upholstery | Faux linen with high density sponge |
| Colour | Dark grey |
Size and fit at a glance
How it compares
A tall headboard on a low frame. General category guidance.
| This bed | A typical platform bed | A bed on a box spring | |
|---|---|---|---|
| Headboard | 44 in | Usually 38 to 41 in | Depends |
| Clearance | 6 in | Varies | Almost none |
| Mattress window | 10 to 12 in | Often not stated | Set by the set |
| Published capacity | 375 lb | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Children's and guest rooms
A 44 inch headboard on a Twin, which is taller than most beds this size carry.
Anyone checking capacity
Three hundred and seventy five pounds is the published figure for the Twin, lower than the larger sizes.

What we stand behind
- The 79 in by 42.5 in frame size, the 76 in deck, the 44 inch headboard, the 12 inches above the deck, the 6 inch clearance, the twelve slats, the 10 to 12 inch mattress window and the 375 lb capacity are the manufacturer's published figures for this size.
- The description gives capacities for three sizes in one string; only this size's drawing figure is used.
- Slat spacing, fabric fibre content and frame net weight are not published.
- The mattress, bedding and nightstands in the photographs are not included.
Frequently asked questions
What mattress does it take?
Twin, 38 x 75 in, 10 to 12 inches thick. Not included.
How much floor does it need?
79 in long by 42.5 in wide.
How tall is the headboard?
44 inches from the floor, with 12 inches above the mattress deck.
How much room is under the bed?
6 inches of clearance.
Is a box spring needed?
No. Twelve plywood slats form an embedded deck.
What weight will it carry?
375 lb for this size, as published.




















