Twin House Frame Kids Floor Bed with Pitched Roof and Wooden Slats, White
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Twin House Frame Kids Floor Bed with Pitched Roof and Wooden Slats, White
Description
Twin House Frame Kids Floor Bed with Pitched Roof and Wooden Slats, White
The same house frame in white, around a Twin mattress laid on slats at floor level. It needs 79.5 by 45 inches of floor and reaches 72.5 inches at the ridge, with the eaves at 43.5.
A white painted house frame in solid wood and plywood, with a pitched roof over a slatted deck on the floor.
Measure the ceiling too
Seventy two and a half inches at the ridge is the figure most people forget on a house bed. In a room with a sloping ceiling or a low light fitting, check that height and the 43.5 inch eaves before deciding where the bed stands.
What the frame actually is
Four posts, a pitched roof made of straight lengths, and a slatted deck between them. There are no side panels and no rails, so the bed reads as an outline rather than a solid piece in a small room.
White against any wall colour
The white version disappears into a pale wall and outlines itself against a dark one. Either way it is painted solid wood and plywood, not a veneer over board, and the manufacturer expects it to be decorated or repainted.
What the record publishes
79.5 x 45 x 72.5 in
Overall frame size.
43.5 in eaves
Height to the underside of the roof.
Floor level deck
No clearance and nothing to climb.
Solid wood and plywood
Painted white.
No box spring
The mattress sits on the slats.
88 lb published capacity
The lower of two figures on the same panel.
Specifications
| Mattress size taken | Twin, 38 in x 75 in (not included) |
|---|---|
| Frame outer size | 79.5 in long x 45 in wide x 72.5 in tall |
| Height to the eaves | 43.5 in |
| Slats | Heavy duty wooden slats; count not published |
| Slat spacing | Not published |
| Under-bed clearance | None. The deck sits at floor level |
| Box spring | Will not fit. This is a floor bed |
| Weight capacity | 88 lb, the lower of two figures on the same panel |
| Materials | Solid wood and plywood |
| Recommended mattress thickness | Not published |
| Colour | White |
Size and fit at a glance
How it compares
A house floor bed against the alternatives. General category guidance.
| Ā | This bed | A toddler bed with rails | A mattress on the floor |
|---|---|---|---|
| Height to climb | None | Usually a low frame | None |
| Roof frame | Yes, 72.5 in | No | No |
| Guardrails | None | Usually partial | None |
| Mattress size | Twin 38 x 75 in | Often cot sized | Any |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Pale bedrooms
A white frame that outlines the bed without adding visual weight to a small room.
Children moving to a Twin
A full 38 by 75 inch mattress at floor level, so the bed lasts past the toddler years.
What we stand behind
- The 79.5 by 45 by 72.5 inch frame size and the 43.5 inch eaves height are the manufacturer's published figures.
- The weight capacity is contradictory in the record: the manufacturer's own drawing gives 88 lb in its header and 300 lb in the badge beneath it, and the written description says 300 lb. The lower figure is published here.
- Slat count, slat spacing and a recommended mattress thickness are not published.
- The mattress, bedding, rugs and toys in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Twin, 38 by 75 inches. Not included.
How much floor does it need?
79.5 inches long by 45 inches wide.
How tall is the roof?
72.5 inches at the ridge, with the eaves at 43.5 inches.
What weight will it carry?
The manufacturer's panel gives 88 lb in its header and 300 lb in its badge. The lower figure is published here.
Is a box spring needed?
No. It is a floor bed and the mattress sits on the slats at floor level.
Can it be decorated?
The manufacturer suggests hanging flags, string lights or toys from the frame, or painting it.
You may also like
15" x 62" Full Length Mirror, Tempered Glass Floor Mirror on Wheels with Storage Shelves, Coat Hangers, Brown Wood Grain
Vanity Desk with Mirror and 12 LED Lights, Makeup Table w/ Power Outlet, 3 Light Colour, 6 Drawers and 2 Shelves, White
Staff Pick
Makeup Vanity Desk with Mirror and Lights, Dressing Table with 7 Drawers, 6 Hidden Sliding Storage Compartments, White
22" x 30" Bathroom Mirror for Wall, Rectangular Mirror for Living Room, Bedroom, Entryway, Black
Vanity Desk with 10 Dimmable LED Lights, Mirror Dressing Table with 7 Drawers and Charging Station, White
Makeup Vanity Desk Set with Stool, Dressing Table with LED Lighting Mirror, Drawers, for Bedroom, White
Makeup Vanity Desk with Round Mirror and 2 Drawers, Dressing Table with Cushioned Stool Set for Bedroom (White)
Bundle & Save
Corner Vanity Desk with Mirror, Makeup Vanity Table with 5 Drawers and Open Shelves, Dressing Table with 3-piece Mirror for Bedroom, Black
Vanity Set with Flip Top Mirror, Makeup Vanity Desk with Stool, Dressing Table with Drawer and 7 Compartments, White
