Queen Solid Wood Platform Bed with Retro Slatted Headboard and 12 Plywood Slats
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Queen Solid Wood Platform Bed with Retro Slatted Headboard and 12 Plywood Slats
Description
Queen Solid Wood Platform Bed with Retro Slatted Headboard and 12 Plywood Slats
Eighty nine inches long for an eighty inch mattress, because the headboard leans back at 106 degrees instead of standing straight. That slope is what makes it comfortable to read against, and it is also the number that decides whether the bed fits your wall.
The problem this solves
What usually goes wrong
A sloped headboard sells itself on comfort and says nothing about the floor it eats. Nine inches past the mattress will not show up until the bed is half built.
How this one answers it
The drawing publishes the full 89 by 62 inch footprint, not just the 80 by 60 deck. Mark 89 inches on the wall with tape before ordering and the slope becomes a feature rather than a return.
A walnut toned solid wood platform with a three bar headboard that leans back, on rubber wood legs with adjustable pads.

Eighty nine inches of wall
The deck is 80 by 60 for a Queen mattress, but the frame measures 89 inches long and 62 wide once the sloped headboard is counted. Nine inches beyond the mattress is a lot, and it is the single measurement to take before ordering this one.
A headboard at 106 degrees
Three horizontal bars set back at 106 degrees rather than upright. A vertical headboard pushes your shoulders forward when you sit up in bed. This one gives you something to lean into, and it clears 49 inches from the floor.


Twelve slats, three centre legs
Plywood slats across the frame with three legs down the centre line under them, each on an adjustable pad for an uneven floor. The published capacity for the Queen is 800 lb and the mattress window runs 4 to 12 inches thick.
What the record publishes
89 x 62 in frame
Overall footprint including the sloped headboard.
49 in headboard
At a 106 degree lean.
15.5 in deck height
With 12 inches of clearance beneath.
12 plywood slats
On three middle support legs.
800 lb capacity
The published figure for the Queen.
4 to 12 in mattress
The recommended thickness window.
Specifications
| Mattress size taken | Queen, 60 in x 80 in (not included) |
|---|---|
| Recommended mattress thickness | 4 in to 12 in |
| Frame outer size | 89 in long x 62 in wide |
| Deck size | 80 in long x 60 in wide |
| Headboard height | 49 in from the floor |
| Headboard angle | 106 degrees |
| Deck height | 15.5 in |
| Under-bed clearance | 12 in |
| Slats | 12 plywood slats |
| Slat spacing | Not published |
| Centre support | 3 middle legs with adjustable foot pads |
| Box spring | Not required |
| Weight capacity | 800 lb |
| Materials | Solid wood with rubber wood legs |
Size and fit at a glance
How it compares
A sloped headboard against an upright one. General category guidance.
| Ā | This bed | An upright headboard Queen | A no headboard platform |
|---|---|---|---|
| Frame length | 89 in | Usually 83 to 85 in | About 80 in |
| Headboard | 49 in at 106 degrees | Vertical | None |
| Clearance | 12 in | Varies | Varies |
| Published capacity | 800 lb | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
People who read in bed
A 49 inch board leaning back at 106 degrees, which is what stops the shoulders rolling forward.
Rooms with the space to spare
Eighty nine inches is long for a Queen, so check the wall before the slope wins you over.

What we stand behind
- The 89 by 62 inch frame size, the 80 by 60 inch deck, the 49 inch headboard, the 106 degree angle, the 15.5 inch deck height, the 12 inch clearance, the twelve slats and the 800 lb capacity are the manufacturer's published figures for the Queen.
- The description gives three capacities in one string across sizes; only the 800 lb shown on the Queen drawing is used.
- Slat spacing and frame net weight are not published.
- The mattress, bedding and baskets in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Queen, 60 by 80 inches, 4 to 12 inches thick. Not included.
How much floor does it need?
89 inches long by 62 inches wide.
Why is it 89 inches long?
The headboard leans back at 106 degrees rather than standing upright.
How tall is the headboard?
49 inches from the floor.
Is a box spring needed?
No. Twelve plywood slats and three middle legs form the platform.
What weight will it carry?
800 lb for the Queen, as published.




















