Twin Upholstered Platform Bed with Square Tufted Headboard and 10 Wood Slats
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Twin Upholstered Platform Bed with Square Tufted Headboard and 10 Wood Slats
Description
Twin Upholstered Platform Bed with Square Tufted Headboard and 10 Wood Slats
Eighty three and a half inches long is the figure to check here, because a Twin mattress is only 75 and the headboard adds the rest. The bed stands 40.5 inches tall and carries a published 338 lb on ten bentwood slats.
A padded Twin frame with a square tufted headboard, bentwood slats and eleven legs under the deck.

Measure the length, not the mattress
The frame runs 83.5 inches long by 43.5 inches wide and stands 40.5 inches at the headboard, for a Twin mattress of 38 by 75 inches. Eight and a half inches of that length is headboard, which is what catches people measuring a short wall.
Clearance for a vacuum
The record gives the under-bed space two ways, seven inches in the specification list and eight on the drawing. Seven is the figure used here. Either way a robot vacuum clears it, which is what the manufacturer's own photograph shows.


Ten slats, eleven legs
Bentwood slats run across the frame, six legs around the perimeter and five more down the centre. The published capacity is 338 lb and the mattress sits straight on the slats, so there is no box spring to buy.
What the record publishes
83.5 x 43.5 x 40.5 in
Overall frame size including the headboard.
7 in clearance
The lower of the two figures the record gives.
10 bentwood slats
On six perimeter legs and five centre legs.
338 lb capacity
The manufacturer's published figure.
Padded side rails
Upholstered rather than bare frame edges.
74.5 lb net weight
The published weight of the frame.
Specifications
| Mattress size taken | Twin, 38 in x 75 in (not included) |
|---|---|
| Frame outer size | 83.5 in long x 43.5 in wide x 40.5 in tall |
| Under-bed clearance | 7 in |
| Slats | 10 bentwood slats |
| Slat spacing | Not published |
| Legs | 11, six on the perimeter and five in the centre |
| Box spring | Not required |
| Weight capacity | 338 lb |
| Frame net weight | 74.5 lb |
| Materials | MDF, wood, fabric, sponge |
| Recommended mattress thickness | Not published |
Size and fit at a glance
How it compares
An upholstered Twin against a metal Twin frame. General category guidance.
| Ā | This bed | A metal Twin frame | A Twin with a box spring |
|---|---|---|---|
| Headboard | 40.5 in, padded | Often none | Depends on the frame |
| Slats | 10 bentwood | Metal or none | Box spring instead |
| Published capacity | 338 lb | Varies | Varies |
| Extra to buy | Nothing | Nothing | A box spring |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Small or shared bedrooms
At 43.5 inches wide it takes little more room than the mattress, but plan for the full 83.5 inch length.
Guest rooms
A padded headboard and padded rails, so nothing hard meets an elbow on a bed people use a few nights a year.

What we stand behind
- The 83.5 by 43.5 by 40.5 inch frame size, the ten slats, the eleven legs, the 338 lb capacity and the 74.5 lb net weight are the manufacturer's published figures.
- The record gives under-bed clearance as seven inches in one place and eight in another; the lower figure is published here.
- The record also lists a 15.5 inch footboard height and a Beige or Grey colour, neither of which matches the photographs of this item, so both are left out.
- The mattress and bedding in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Twin, 38 by 75 inches. Not included.
How much floor does it need?
83.5 inches long by 43.5 inches wide.
How tall is it?
40.5 inches at the headboard.
Is a box spring needed?
No. Ten bentwood slats carry the mattress directly.
How much room is under the bed?
Seven inches, the lower of the two figures the record gives.
What weight will it carry?
338 lb, as published.




















