Full Size Upholstered Storage Bed with 4 Drawers and Height Adjustable Headboard, Grey

Storage beds are sold on drawer count, and four shallow drawers are often bought to hold things that will never lie flat in five inches.

The inner sizes are published here, two at 25.5 by 20 and two at 22 by 20.5, both 5 inches deep. Fold a sweater and measure it before the bed arrives, and you will know exactly what the four drawers will absorb.

The numbers that decide the room

The slat deck measures 75 by 54 inches for a Full mattress, the frame runs 77.5 inches end to end and the headboard is the widest part at 59 inches. Side rails sit 11.5 inches off the floor. Measure the 59 inches, not the mattress, when you are working out what fits between two walls.

Two big, two small

The two large drawers hold 25.5 by 20 inches inside and the two small ones 22 by 20.5 inches, both 5 inches deep. That depth takes folded sweaters and spare bedding flat, not stacked. Every drawer rolls on casters so nothing drags across the floor as it opens.

Set the headboard to the mattress

The board bolts in anywhere from 41 to 44 inches off the floor. That range exists because the published mattress window is wide, 8 to 12 inches, and a thin mattress under a tall fixed board leaves an awkward gap between the bedding and the tufting.

Steel under the linen

The frame under the upholstery is reinforced steel with a published 660 lb capacity. An anti friction mute bar sits between the slats and the rails to take out the creak, and the feet have both non slip pads and adjustable pads for an uneven floor. The slats press into place by hand.

Adjustable through that range at assembly.

Two at 25.5 by 20 in, two at 22 by 20.5 in, both 5 in deep.

The published figure for the frame.

The manufacturer's recommended thickness.

Fitted to cut friction noise between slats and rails.

With non slip pads for an uneven floor.

Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.

Return within 14 days of purchase, unused, in original condition and packaging.

Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.

Four drawers under the bed replaces a low chest, and the 5 inch depth is honest about what it takes.

The 8 to 12 inch window plus a 41 to 44 inch headboard covers most Full mattresses sold here.

Casters on every drawer and non slip pads under the feet, which is the pairing that keeps laminate unmarked.

What we stand behind

• The 75 by 54 inch deck, the 77.5 inch frame length, the 59 inch headboard width, the 11.5 inch rail height, the 41 to 44 inch headboard range, the drawer inner sizes, the 8 to 12 inch mattress window and the 660 lb capacity are the manufacturer's published figures.
• Slat count, slat spacing and under-bed clearance are not published.
• This listing does not carry the size in its title or web address, though it is the Full size; the Queen is a separate listing.
• The mattress, bedding and lamps in the photographs are not included.

What mattress does it take?

A Full or Double, 54 by 75 inches, 8 to 12 inches thick. Not included.

How wide is the bed in the room?

The headboard is the widest part at 59 inches, and the frame is 77.5 inches long.

How big are the drawers inside?

Two at 25.5 by 20 by 5 inches and two at 22 by 20.5 by 5 inches.

Do the drawers need clearance at the side?

Yes. They pull out from the sides of the bed, so leave room beside the frame.

Is a box spring needed?

No. The slat platform carries the mattress directly.

What weight will it carry?

660 lb, as published for the frame.