Full Size Wooden Platform Bed with 2 Drawers, Enclosed Base and 40.5 Inch Headboard, Gray

A bed on legs leaves a shallow, awkward gap that a vacuum head does not really reach. Whatever goes under there stays there, and it is the first thing anyone notices when the bed gets moved.

This frame has a fully enclosed base that runs to the floor, so nothing gets underneath at all. The storage that would have been an open gap is two drawers instead, on metal slides at the foot of the bed.

Every measurement that matters

79.5 inches long, headboard 56.5 inches across and 40.5 inches from the floor, mattress area 76 by 54 inches. The drawers are 24.5 inches deep, 13 inches wide and 5 inches inside, so allow a bit over two feet of clear floor at the drawer end. The manufacturer asks for a mattress no thicker than 8 inches.

Boxed in on all four sides

The base panel runs right down to the floor. There is no gap for dust, no shadow line and nothing to vacuum under. It also stiffens the whole carcass, because the base becomes part of the structure rather than a set of open rails.

Metal slides, not wheels

These run on metal slides rather than castors, which is the better arrangement on carpet: a wheeled drawer digs in, a slide does not care what is underneath. The knobs are round and flush enough not to catch a knee.

Three legs down the centre

Three support legs run under the middle of the deck, inside the enclosed base. On a Double, that centre line is where two sleepers meet and where an unsupported deck would start to dip.

24.5 by 13 inches with a 5 inch inside depth.

Nothing sharp at knee height.

Over 3 middle support legs, no box spring.

The base is boxed in rather than open underneath.

A tall plain panel, 56.5 inches across.

The mattress sits inside the rails.

The manufacturer's stated limit.

With plywood slats across the deck.

Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.

Return within 14 days of purchase, unused, in original condition and packaging.

Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.

The enclosed base means there is no under-bed space to collect dust in the first place.

Two drawers at the foot of the bed, on metal slides, for clothes and spare linen.

The published limit is 8 inches, which covers most foam mattresses but not a deep pillow top.

What we stand behind

• The 79.5 inch frame length, the 56.5 by 40.5 inch headboard, the 76 by 54 inch mattress area, the 15.5 inch base height, the drawer measurements and the 8 inch mattress limit are the manufacturer's published figures.
• No weight capacity is published for this bed, so we state none.
• Slat spacing and the outer width of the frame are not published.
• Drawer slide load ratings are not published.
• The mattress, bedding and nightstands in the photographs are not included.
• The record does not publish a slat gap, and eight slats across a 76 inch deck is a wider spacing than the twelve or fourteen slat decks elsewhere in this range.

What mattress does it take?

A Full, sold as a Double in Canada, 54 by 75 inches, up to 8 inches thick. Not included.

How long is the frame?

79.5 inches, with a headboard 56.5 inches across.

How big are the drawers?

24.5 inches deep by 13 inches wide with a 5 inch inside depth.

How tall is the headboard?

40.5 inches from the floor.

Is a box spring needed?

No. Eight plywood slats over three middle support legs form the platform.

What is the weight capacity?

It is not published for this bed, so we do not state one.

Is there space under the bed?

No. The base is fully enclosed, so the storage is the two drawers.