Full Size Pine Bed Frame with 2 Under-Bed Storage Drawers and Slatted Headboard, Espresso

The drawer is the number to check

80 inches long and 58 inches wide on the floor, with the headboard at 36.5 inches and the footboard at 18.5. Each drawer is 37.5 inches deep, so allow more than three feet of clear floor on whichever side you put them. The manufacturer's mattress window is 5 to 8 inches thick, and the published capacity is 350 lb.

Nine and a half inches deep inside

The photo shows folded clothing stacked, not laid flat. At 9.5 inches inside, these take sweaters, spare duvets and boots, which the shallow 4 or 5 inch drawers on most storage beds will not. Two of them together hold about as much as a small chest of drawers, and they sit in space the bed was already using.

Handles cut into the wood

There is no metal pull to catch a knee on. The handle is a shape cut out of the drawer front, and the drawer runs on wheels with a stopper so it cannot vanish under the deck. The corner joints are bolted rather than glued, which is the part that decides whether a wooden bed still feels solid after a house move.

Pine at both ends

Natural pine for the headboard and footboard, stained and smoothed. The horizontal slats give it the look of an older painted bedstead rather than a flat modern panel. The footboard stops at 18.5 inches, low enough that it does not block the view of the room from the pillow.

37.5 by 16.5 inches with a 9.5 inch inside depth.

The drawers can be fitted on whichever side suits.

So a pushed drawer stops at the rail.

Shaped into the drawer front, nothing to catch on.

Screw fixed, with additional support legs.

The lower of the two figures on the record.

Headboard and footboard in natural pine.

The mattress sits inside the rails so it does not slide.

Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.

Return within 14 days of purchase, unused, in original condition and packaging.

Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.

Two drawers 9.5 inches deep swallow a spare duvet, the winter bedding and the boots that would otherwise live in the hall.

Both drawers can be fitted on the open side, so pushing the bed into a corner costs you nothing.

The manufacturer's window is 5 to 8 inches, which suits a firm foam rather than a deep pillow top.

What we stand behind

• The 80 by 58 inch frame size, the 36.5 inch headboard, the 18.5 inch footboard, the drawer measurements and the 5 to 8 inch mattress thickness are the manufacturer's published figures.
• The written record states a 352 lb load capacity and the manufacturer's drawing states 350 lb. We publish the lower figure, 350 lb.
• The manufacturer's dimension panel is headed Twin Size Bed while the drawing itself gives an 80 by 58 inch Full footprint and this listing is sold as a Full. We publish the dimensions from the drawing and flag the heading as an error on the supplier's artwork.
• Slat spacing and under-bed clearance are not published.
• The mattress and bedding in the photographs are not included.

What mattress does it take?

A Full, sold as a Double in Canada, 54 by 75 inches, between 5 and 8 inches thick. Not included.

How big is the frame?

80 inches long by 58 inches wide.

How deep are the drawers?

9.5 inches inside, and 37.5 inches front to back by 16.5 inches wide.

Can the drawers go on either side?

Yes. They roll on wheels and are made to be used from whichever side suits the room.

What weight will it hold?

350 lb. The written record says 352 lb and the drawing says 350, so we publish the lower.

How tall is the headboard?

36.5 inches from the floor, with an 18.5 inch footboard.

Is a box spring needed?

No. Eight screw fixed wooden slats form the platform.