Queen Upholstered Platform Bed with Vertical Channel Headboard and 12 Plywood Slats
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Queen Upholstered Platform Bed with Vertical Channel Headboard and 12 Plywood Slats
Description
Queen Upholstered Platform Bed with Vertical Channel Headboard and 12 Plywood Slats
Sixty five inches across is five more than the Queen mattress it holds, and that extra width is upholstered rail on both sides. The headboard stands 44 inches with a 12 inch gap above the deck and the frame carries a published 800 lb.
The Queen in dark charcoal faux linen, with the same vertical padded channels running the full height of the board.

Eighty four and a half by sixty five
The frame is 84.5 inches long and 65 across for a 60 by 80 inch Queen. That is four and a half inches of extra length and five of extra width, all of it upholstered rail. The headboard reaches 44 inches with a 12 inch gap above the mattress deck and there are 6 inches of clear floor.
Ten to twelve inches of mattress
The deck is recessed inside the rails and the manufacturer asks for a mattress between 10 and 12 inches thick to sit in it. Within that range the mattress is held on all four sides and the top of it finishes just under the headboard channels.


Twelve slats across a Queen
Twelve plywood slats and additional legs beneath them, for a published 800 lb. A Queen deck spans 60 inches, so the extra legs are doing real work rather than sitting there for the specification sheet.
Six inches, honestly stated
The manufacturer calls it bottom space for cleaning rather than storage, which is the fair description. A robot vacuum runs the length of the bed and flat baskets slide under. Luggage does not.

What the record publishes
44 in channel headboard
With a 12 inch gap above the mattress deck.
12 plywood slats
With additional legs, no box spring needed.
800 lb capacity
The manufacturer's published load capacity.
6 in clearance
Published bottom space, robot vacuum friendly.
Mattress 10 to 12 in
The manufacturer's recommended thickness.
Faux linen over sponge
High density sponge behind the cover.
Specifications
| Mattress size taken | Queen, 60 in x 80 in (not included) |
|---|---|
| Recommended mattress thickness | 10 in to 12 in |
| Frame outer size | 84.5 in long x 65 in wide |
| Headboard height | 44 in from the floor |
| Gap above the deck | 12 in |
| Under-bed clearance | 6 in |
| Slats | 12 plywood slats with additional legs |
| Slat spacing | Not published |
| Box spring | Not required |
| Weight capacity | 800 lb |
| Upholstery | Faux linen fabric over high density sponge |
| Colour | Dark grey |
Size and fit at a glance
How it compares
Channel tufting on a Queen against the alternatives. General category guidance.
| Ā | This bed | A button tufted Queen | A wood headboard Queen |
|---|---|---|---|
| Surface | Vertical channels | Buttons and dimples | Flat wood |
| Published capacity | 800 lb | Varies | Varies |
| Published clearance | 6 in | Varies | Varies |
| Mattress range | 10 to 12 in | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
People who lean back to read
A 44 inch padded board with no buttons, and a 12 inch gap for pillows to sit in.
Anyone with a robot vacuum
Six inches of published bottom space, clear the length of the bed.

What we stand behind
- The 84.5 by 65 inch frame size, the 44 inch headboard, the 12 inch gap above the deck, the 6 inch clearance, the twelve slats, the 800 lb capacity and the 10 to 12 inch mattress thickness are the manufacturer's published figures.
- The cover is published as a faux linen fabric, not linen.
- Slat spacing is not published.
- Sponge density is not published beyond high density.
- The mattress, bedding and nightstands in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Queen, 60 by 80 inches, between 10 and 12 inches thick. Not included.
How much floor does it need?
84.5 inches long by 65 inches wide.
How tall is the headboard?
44 inches from the floor, with a 12 inch gap above the deck.
What is the cover made of?
A faux linen fabric over high density sponge, as published.
How much space is under the bed?
6 inches of clearance.
What weight will it hold?
800 lb, as published.




















