14 Inch King Size Rubberwood Platform Bed Frame, 14 Slats at a 2.5 Inch Gap, Walnut
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
14 Inch King Size Rubberwood Platform Bed Frame, 14 Slats at a 2.5 Inch Gap, Walnut
Description
14 Inch King Size Rubberwood Platform Bed Frame, 14 Slats at a 2.5 Inch Gap, Walnut
Fourteen slats set 2.5 inches apart carry a King mattress without a box spring, which matters because foam makers usually cap the gap at three inches. The written record puts the frame at 80 by 76 by 14 inches with 10.5 inches of clearance below.
A wide, low frame in a walnut stain, with the deck and the legs doing all the work and nothing standing above the mattress.

The gap between the boards
The panel measures the space between slats at 2.5 inches. Foam and hybrid mattresses usually ask for three inches or less, so this deck is inside that. The same panel counts ten legs, which is what a King width needs down the centre.
How wide a King really is
A King mattress in Canada is 76 inches across and 80 inches long. The written record puts this frame at 80 by 76 by 14 inches. Allow walking room on both sides before you commit: a King needs about eleven feet of wall to wall space to be comfortable.


Quiet and staying put
Adhesive strips and hook and loop fasteners both hold the mattress to the slats. On a King, where two people move independently, that is what stops the mattress drifting. The manufacturer also states the assembled frame does not creak.
Dressed, it is just the rail
Made up, only the rail and the legs show. There is no headboard, so the bed can back onto a window or a low wall without covering anything.

What the record publishes
14 slats at a 2.5 in gap
The gap is measured on the manufacturer's panel.
Ten legs
Six on the sides, four down the centre of a King span.
10.5 in clearance
Floor to slat, as the written record states.
No box spring
The slats carry the mattress directly.
Rubberwood and poplar
Rubberwood rails and legs, poplar slats.
Noise free build
The manufacturer states the joined frame does not creak.
Specifications
| Mattress size taken | King, 76 in x 80 in (not included) |
|---|---|
| Frame outer size | 80 in x 76 in x 14 in (written record) |
| Under-bed clearance | 10.5 in |
| Box spring | Not required |
| Slats | 14, included |
| Slat spacing | 2.5 in gap (manufacturer panel) |
| Weight capacity | Not published for this colourway |
| Legs | 10 |
| Frame material | Rubberwood with poplar slats |
| Product weight | 76 lb |
| Colour | Walnut |
| Headboard | None |
Size and fit at a glance
How it compares
What changes on a King span. General category guidance, not testing.
| This frame | A four leg King frame | King frame plus box spring | |
|---|---|---|---|
| Centre support | 4 centre legs | None or one bar | Box spring |
| Published slat gap | 2.5 in | Varies | Not applicable |
| Extra parts to buy | None | Sometimes a bunkie board | Box spring |
| Height added | 14 in | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Couples on a foam King
A 2.5 inch gap is inside the three inch limit most foam warranties set, so no bunkie board is needed.
Rooms with a low sill or a sloped ceiling
Nothing stands above the mattress, so the bed can go where a headboard would not.

What we stand behind
- The 2.5 inch slat gap and the ten leg count are read from the manufacturer's own panel. The 80 by 76 by 14 inch frame size and the 76 lb product weight come from the written record.
- The manufacturer's dimension photo on this listing shows 80 by 60 inches, which is a Queen footprint, not the King the title, the handle and the written specification all describe. We publish the written King figures and have left that photo out of the page.
- No weight capacity is published for this colourway, so we state none.
- The record lists the colour as Brown/Natural/Walnut. The title and the photography say walnut, and that is what we describe.
- The mattress is not included.
Frequently asked questions
What mattress does it take?
A King, 76 by 80 inches in Canada. The mattress is not included.
What size is the frame itself?
The written record gives 80 by 76 inches, standing 14 inches tall.
How far apart are the slats?
2.5 inches, measured on the manufacturer's panel. That is inside the three inch limit foam mattresses usually ask for.
Do I need a box spring?
No. The 14 slats support the mattress on their own.
What holds up the middle of a King?
Four legs run down the centre line in addition to the six around the perimeter.
What is the weight capacity?
It is not published for this colourway, so we do not state one.




















