Twin Tent Frame House Bed with 2 Rolling Drawers and 8 Plywood Slats, Natural
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Twin Tent Frame House Bed with 2 Rolling Drawers and 8 Plywood Slats, Natural
Description
Twin Tent Frame House Bed with 2 Rolling Drawers and 8 Plywood Slats, Natural
An A frame tent over a low Twin deck, with two drawers that roll out from one side. Two numbers decide the fit: the mattress is capped at six inches, and the splayed legs make the widest point 46.5 inches at floor level rather than the 39.5 inches of the deck above them.
Natural finish wood in an A frame tent shape, with a raised edge around the deck, eight plywood slats and two storage drawers on wheels underneath the frame.

Six inches of mattress
That is the published cap, and on a bed with a raised edge rather than a guardrail it is what keeps the lip standing above the sleeping surface. The deck is 76 by 39.5 inches inside a frame 78 inches long, and the legs splay to 46.5 inches at floor level.
Wood grain, not paint
The natural version leaves the grain visible through the finish, which reads warmer against a painted wall and hides the knocks a child's bed collects better than a flat colour would. The ridge crossbar carries whatever a child wants hung from it.


Storage that rolls
Each drawer holds 35 by 15 inches at five inches deep and runs on wheels rather than in a channel. Loaded with books or blocks they still pull out easily, and built in stoppers keep them on the rails rather than sliding out onto the floor.
Fifty nine inches to the ridge
The tent reaches 59 inches, which is lower than a pitched roof house bed and clears most sloping ceilings. Underneath the deck the record gives twelve inches of space, and the two drawers use part of it.

What the record publishes
6 in mattress limit
Twin size, 38 by 75 inches.
78 x 46.5 x 59 in
Overall frame size including the splayed legs.
2 rolling drawers
35 by 15 by 5 inches inside, with stoppers.
8 plywood slats
Inside a raised edge, no box spring.
15.5 in frame height
With 12 inches of under-bed space in the record.
Tent frame
Made to carry lights, banners or curtains.
Specifications
| Mattress size taken | Twin, 38 in x 75 in (not included) |
|---|---|
| Maximum mattress thickness | 6 in |
| Frame outer size | 78 in long x 46.5 in wide x 59 in tall |
| Deck size | 76 in long x 39.5 in wide |
| Ridge height above the deck | 39.5 in |
| Frame height | 15.5 in |
| Under-bed space | 12 in, as given in the record |
| Drawers | 2, inner 35 in x 15 in x 5 in, on rolling wheels with stoppers |
| Slats | 8 plywood slats |
| Slat spacing | Not published |
| Edges | Raised, to hold the mattress in place |
| Box spring | Not required |
| Weight capacity | Not published |
| Materials | Wood frame with plywood slats |
| Colour | Natural |
Size and fit at a glance
How it compares
A tent frame bed against the alternatives. General category guidance.
| Ā | This bed | A pitched roof house bed | A plain Twin frame |
|---|---|---|---|
| Frame shape | A frame tent | Pitched roof on posts | None |
| Storage | 2 rolling drawers | Usually none | None |
| Widest point | 46.5 in | Usually 42 in | About 40 in |
| Mattress limit | 6 in | Varies | Usually none |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Natural wood schemes
A finish that shows the grain rather than covering it.
Small bedrooms
Drawers under the bed instead of a toy chest taking floor elsewhere.
Low ceilings
Fifty nine inches to the ridge, which is short for a frame this shape.

What we stand behind
- The 78 by 46.5 by 59 inch frame size, the 76 by 39.5 inch deck, the 39.5 inch ridge height above the deck, the 15.5 inch frame height, the drawer inner size, the eight slats and the 6 inch maximum mattress thickness are the manufacturer's published figures.
- Weight capacity, slat spacing and frame net weight are not published.
- The lights, banners and curtains shown on the frame in the photographs are not included.
- The mattress, bedding and toys in the photographs are not included.
Frequently asked questions
What mattress does it take?
A Twin, 38 by 75 inches, no thicker than 6 inches. Not included.
How much floor does it need?
78 inches long by 46.5 inches wide, and it stands 59 inches tall.
Why is it 46.5 inches wide?
The A frame legs splay outward at both ends, so the widest point is below the tent rather than at the deck.
How big are the drawers?
Two at 35 by 15 inches inside and 5 inches deep, on rolling wheels with stoppers.
Is a box spring needed?
No. Eight plywood slats and a raised edge hold the mattress directly.
What weight will it carry?
Not published for this frame.




















