Set of 2 Black Swivel Counter Stools with Curved Low Back and Rubber Wood Legs, 24.5 Inch Seat
Fast delivery
Arrives quickly and safely
Buyer protection
Covered end to end
Secure packaging
Damage-free guarantee
Ships from
ValuHub Fulfillment
Set of 2 Black Swivel Counter Stools with Curved Low Back and Rubber Wood Legs, 24.5 Inch Seat
Description
Set of 2 Black Swivel Counter Stools with Curved Low Back and Rubber Wood Legs, 24.5 Inch Seat
A curved bent wood shell in flat black, dipped through the seat and rising to a short 8 in back, turning on a steel plate above four square legs. The seat is 24.5 in from the floor and the whole stool 31 in, so it stays under most counter tops.
Matte black, bent wood, and a seat that turns without a sound.

Height and counter
Twenty four and a half inches to the seat, and the drawing marks the counter it is for at 35 in to 39 in. Under a 36 in top that leaves 11.5 in of knee room.
Two footrest heights
Footrest rails at 5.5 in and 6.5 in, rather than a single rung. The back rises only 8 in above the seat, which is why the stool is 31 in overall and still slides under a counter.


What is under the seat
The legs are 1.5 in square timber. Under the seat sits a reinforced plate with the swivel bearing in it, and each leg ends in a threaded footpad you can turn to take up an uneven floor.
What you get
24.5 in seat height
For counters of 35 in to 39 in.
360 degree swivel
On a steel plate, described as noise free.
Curved bent wood shell
Dipped seat rising to an 8 in back.
Two footrest heights
Rails at 5.5 in and 6.5 in.
1.5 in square legs
Solid rubber wood, reinforced underneath.
Adjustable footpads
Threaded, for a floor that is not flat.
Specifications
| Pieces | 2 stools |
|---|---|
| Colour | Black |
| Material | Rubber wood |
| Seat height | 24.5 in |
| Overall height | 31 in |
| Seat width | 15 in |
| Seat depth | 16.5 in |
| Back height above seat | 8 in |
| Footrest heights | 5.5 in and 6.5 in |
| Leg section | 1.5 in x 1.5 in |
| Swivel | 360 degrees |
| Weight capacity | 350 lb per stool |
| Suitable counter height | 35 in to 39 in |
How it compares
A low back swivel stool against the usual alternatives. General category guidance.
| These stools | Backless stool | Full back stool | |
|---|---|---|---|
| Overall height | 31 in | Same as the seat | Often 36 in to 42 in |
| Back support | 8 in curved shell | None | 12 in or more |
| Swivel | 360 degrees | Varies by brand | Varies by brand |
| Seat height | 24.5 in | Varies | Varies |
Shipping
Ships from a Canadian warehouse. Free shipping on orders over $150. Some remote areas, PO boxes and surcharge regions may be excluded or cost extra.
Returns
Return within 14 days of purchase, unused, in original condition and packaging.
Warranty
Covered directly by the manufacturer under their warranty terms for material and manufacturing defects.
Who is this perfect for?
Dark modern kitchens
Flat black timber with no visible fixings.
Counters people linger at
A shaped seat, a back and two footrest heights.
Uneven floors
Threaded pads on every leg.

What we stand behind
- The 24.5 in seat height, the 31 in overall height, the footrest heights and the 350 lb figure come from this listing's own drawing.
- The title says 24.5 inch and the drawing agrees.
- The supplier's written copy describes a rich walnut finish on every colour in this family, including this black one. The colour here is taken from the photographs.
- The 350 lb rating is the manufacturer's stated maximum load, from a rig test.
- Ships from a Canadian warehouse, free shipping over $150. 14 day returns, unused and in the original packaging.
Frequently asked questions
Is this counter height or bar height?
Counter. The seat is 24.5 in and the drawing marks it for 35 in to 39 in counters. A 41 in to 43 in bar wants a 28 in to 30 in seat.
Why does the description mention walnut?
The supplier reuses the same text across the black, white and walnut versions of this stool. This listing is the black one, as the photographs show.
Does the swivel make a noise?
The manufacturer describes the swivel base as smooth and noise free. It runs on a steel bearing plate rather than a plastic bush.
Can I level them on a tiled floor?
Yes. Each leg ends in a threaded footpad that screws in and out to take up a rock.


















